PRTG Manual: Windows Updates Status (PowerShell) Sensor

The Windows Updates Status (PowerShell) sensor monitors the status of Windows updates on a computer and counts the available and installed Windows updates that are either from Microsoft or from the local Windows Server Update Services (WSUS) server.

i_round_blueYou can find the updates that the sensor considers in the Server Manager (WSUS) under Roles | Windows Server Update Services | Update Services | Computers | Reports.

Windows Updates Status (PowerShell) Sensor

Windows Updates Status (PowerShell) Sensor

i_square_cyanFor a detailed list and descriptions of the channels that this sensor can show, see section Channel List.

Sensor in Other Languages

  • Dutch: Windows Updates Status (PowerShell)
  • French: Windows statut des mises à jour (PowerShell)
  • German: Windows Updates Status (PowerShell)
  • Japanese: Windows アップデートステータス(PowerShell)
  • Portuguese: Status de atualizações do Windows (PowerShell)
  • Russian: Статус обновления Windows (PowerShell)
  • Simplified Chinese: Windows 更新状态 (PowerShell)
  • Spanish: Estado de actualizaciones Windows (PowerShell)

Remarks

Consider the following remarks and requirements for this sensor:

Remark

Description

Performance impact

This sensor has a very high performance impact. We recommend that you use no more than 50 of this sensor on each probe.

Remote PowerShell

This sensor requires that Remote PowerShell is enabled on the target system and PowerShell 3.0 on both the probe system and the target system.

i_round_blue Also make sure that you have at least PowerShell 3.0 installed on both the probe system and the target system. If you receive an error message regarding issues with the WinRM connection, make sure that remote commands have been enabled in PowerShell. For more information, see the Knowledge Base: How do I enable and use remote commands in Windows PowerShell?

.NET 4.7.2 or later

This sensor requires .NET 4.7.2 or later from Microsoft on the probe system. In a cluster, install it on every cluster node.

i_round_redIf the framework is missing, you cannot create this sensor.

i_square_cyanFor more information, see the Knowledge Base: Which .NET version does PRTG require?

Credentials

This sensor requires credentials for Windows systems.

Scanning interval

This sensor has a fixed minimum scanning interval for performance reasons. You cannot use a shorter scanning interval. Consequently, shorter scanning intervals in the Monitoring settings are not available for this sensor.

  • The minimum scanning interval of this sensor is 1 hour.
  • The recommended scanning interval of this sensor is 12 hours. We recommend this scanning interval to limit the load on the server that this sensor monitors.

IPv6

This sensor supports IPv6.

Limits

This sensor has predefined limits for several metrics.

Initial data

In certain cases, it might take some time until the sensor receives data for the first time.

Time Since Last Update channel

If the sensor cannot determine any values for the Time Since Last Update channel (for example, because the list of updates is empty), it shows the value -1s and changes to the Warning status.

Roaming Profiles

When monitoring a Remote Desktop Server (RDS) system with the option Roaming Profiles enabled, this sensor creates a temporary user profile folder for each scanning interval. To minimize this effect, we recommend that you set the sensor's scanning interval to at least 7 days.

Severity

This sensor displays the severity member Unspecified as None. If the severity member is missing, this sensor displays it as None.

Knowledge Base

Knowledge Base: Where can I find more information about PowerShell sensors?

Hosted probe

i_podYou cannot add this sensor to the hosted probe of a PRTG Hosted Monitor instance. If you want to use this sensor, add it to a remote probe device.

Basic Sensor Settings

Basic Sensor Settings

Basic Sensor Settings

The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:

  • windowsupdatesstatus

i_square_cyanFor more information about basic sensor settings, see section Sensor Settings.

Sensor Specific

Sensor Specific

Sensor Specific

Setting

Description

Port

Enter the number of the port to which this sensor connects. Enter an integer. The default port is 5985.

Port in SPN

Define whether to include the port number in the Service Principal Name (SPN) used for Kerberos authentication, for example, on devices where Microsoft Internet Information Services (IIS) or similar services are installed:

  • Exclude port in SPN (default): Do not include the port number in the SPN.
  • Include port in SPN: Include the port number in the SPN.

i_round_blueWith this option, a client that uses a non-default SPN can authenticate against a remote computer that uses Kerberos authentication.

Authentication Method

Select the authentication method for the connection to the host via PowerShell:

Debug Options

Debug Options

Debug Options

Setting

Description

Result Handling

Define what PRTG does with the sensor result:

  • Discard result (default): Do not store the sensor result.
  • Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt, Result of Sensor [ID].Data.txt, and Result of Sensor [ID].log. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.

i_round_blueIn a cluster, PRTG stores the result in the PRTG data directory of the master node.

Sensor Display

Sensor Display

Sensor Display

Setting

Description

Primary Channel

Select a channel from the list to define it as the primary channel. In the device tree, PRTG displays the last value of the primary channel below the sensor's name. The available options depend on what channels are available for this sensor.

i_round_blueYou can set a different primary channel later by clicking b_channel_primary below a channel gauge on the sensor's Overview tab.

Graph Type

Define how this sensor shows different channels:

  • Show channels independently (default): Show a graph for each channel.
  • Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
    i_round_redYou cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).

Stack Unit

This setting is only visible if you select Stack channels on top of each other above.

Select a unit from the list. PRTG stacks all channels with this unit on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.

Inherited Settings

By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click b_inherited_enabled under the corresponding setting name to disable the inheritance and to display its options.

i_square_cyanFor more information, see section Inheritance of Settings.

Channel List

i_round_blueWhich channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.

Channel

Description

Downtime

In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status

Time Since Last Update

The time passed since the last update

i_round_blueThis channel is the primary channel by default.

i_round_blueThe sensor always creates the channel Time Since Last Update. All other channels are optional and only show up if the sensor can retrieve respective data.

i_round_blueThis channel has default limits:

  • Upper warning limit: 2592000
  • Lower warning limit: 0

Updates (Severity Critical) Hidden

The number of hidden updates with critical severity

i_round_blueThis channel has a default limit:

  • Upper error limit: 0.2

Updates (Severity Critical) Installed

The number of installed updates with critical severity

Updates (Severity Critical) Missing

The number of missing updates with critical severity

i_round_blueThis channel has a default limit:

  • Upper error limit: 0.2

Updates (Severity Important) Hidden

The number of hidden updates with important severity

i_round_blueThis channel has a default limit:

  • Upper warning limit: 0.2

Updates (Severity Important) Installed

The number of installed updates with important severity

Updates (Severity Important) Missing

The number of missing updates with important severity

i_round_blueThis channel has a default limit:

  • Upper error limit: 0.2

Updates (Severity Low) Hidden

The number of hidden updates with low severity

Updates (Severity Low) Installed

The number of installed updates with low severity

Updates (Severity Low) Missing

The number of missing updates with low severity

i_round_blueThis channel has a default limit:

  • Upper warning limit: 0.2

Updates (Severity Moderate) Hidden

The number of hidden updates with moderate severity

Updates (Severity Moderate) Installed

The number of installed updates with moderate severity

Updates (Severity Moderate) Missing

The number of missing updates with moderate severity

i_round_blueThis channel has a default limit:

  • Upper warning limit: 0.2

Updates (Unclassified) Hidden

The number of hidden updates with unclassified severity

Updates (Unclassified) Installed

The number of installed updates with unclassified severity

Updates (Unclassified) Missing

The number of missing updates with unclassified severity

i_round_blueThis channel has a default limit:

  • Upper warning limit: 0.2

More

i_square_blueKNOWLEDGE BASE

Where can I find more information about PowerShell sensors?

Which .NET version does PRTG require?

How do I enable and use remote commands in Windows PowerShell?

What security features does PRTG include?

I have problems with the PowerShell Exchange sensors, what can I do?

My PowerShell sensor returns an error message. What can I do?

I get the error "WinRM cannot process the request" when I try to use a PowerShell sensor

How can I increase memory for Remote PowerShell?

Facing issues with the Windows Updates Status (PowerShell) sensor - can you help me?